Hej.
Jag skulle vilja koppla bort DPM'en på ett lämpligt sätt...
och vad man behöver göra för att köra utan den ?
Skulle även vilja veta om man kan kolla så voltregulatorn funkar som den ska ?
Hoppas på några bra tips
Lynx Ranger Mountain-800H.O. ( 2003 )
Ranger Mountain-800 ( 2003 ) Koppla bort DPM'en... ?
-
bcool
- LynxTalk Member
- Inlägg: 244
- Blev medlem: 23 februari 2011, 00:11
- Skoter: GLS Mountain Edition 153", Gade 1200x
- Ort: Luleå / Niemisel
Re: Ranger Mountain-800 ( 2003 ) Koppla bort DPM'en... ?
DPM Delete:
- Unplug 4 lines from carbs to the top of the DPM and let them hang (from the carb)
- Unplug 2 lines from carbs to bottom of DPM and cap them at the carbs.
- Unplug line from DPM to MPEM and leave it unplugged. (at the MPEM).
- Remove the brass plug in the mouth of each carb ( 6 o'clock position) an leave open.
- Unplug 4 lines from carbs to the top of the DPM and let them hang (from the carb)
- Unplug 2 lines from carbs to bottom of DPM and cap them at the carbs.
- Unplug line from DPM to MPEM and leave it unplugged. (at the MPEM).
- Remove the brass plug in the mouth of each carb ( 6 o'clock position) an leave open.